NUTMEG  OIL

MATERIAL SAFETY DATA SHEET

 

Section I : PRODUCT IDENTIFICATION

 

Product Trade Name : NUTMEG OIL FCC (MYRISTICA FRAGRANS HOUTT.)
US DOT Hazard Class : N/A KEEP AWAY FROM CHILDREN
PH of Product : N/A
UN Number : N/A
Health : 1 Fire : 2 Reactivity : 0

 

Section II : HAZARDOUS INGREDIENTS

 

EXPOSURE LIMIT INFORMATION :
HAZARDOUS INGREDIENT(S) : NUTMEG OIL FCC (MYRISTICA FRAGRANS HOUTT.)
CAS NO. : 8008-45-5
FEMA NO. : 2793
AMT. (%) :
OSHA TWA : 0 N/A
OSHA STEL : 0 N/A
ACGIH TWA : 0 N/A
ACGIH STEL : 0 N/A

 

Section III : PHYSICAL DATA

 

PRODUCT NAME : NUTMEG OIL FCC (MYRISTICA FRAGRANS HOUTT.)
APPEARANCE / ODOR : PALE YELLOW LIQUID / SPICE NUTMEG WOODY TERPY PINEY
SOLUBILITY IN WATER : INSOLUBLE
SPECIFIC GRAVITY : 0.88300 - 0.91700 @ 20.00 C
VAPOR PRESSURE : N/A
MELTING POINT : N/A
VAPOR DENSITY : N/A
BOILING POINT : N/A
VOLATILE BY VOLUME : 100.00
EVAPORATION RATE : N/A

 

Section IV : FIRE AND EXPLOSION HAZARD

 

FLASH POINT (Deg. F.) : 109.00 ( 42.78 Deg. C.) TCC
UPPER FLAMMABLE LIMIT (% BY VOLUME) : N/A
LOWER FLAMMABLE LIMIT (% BY VOLUME) : N/A
EXTINGUISHING MEDIA : Carbon Dioxide; Dry Chemical; Universal-Type Foam.
SPECIAL FIRE FIGHTING PROCEDURES : Self-contained breathing apparatus and protective clothing should be worn when fighting fires involving essential oils or chemicals.
UNUSUAL FIRE AND EXPLOSION HAZARD : None known to TGSC. Keep away from heat and open flames.

 

Section V : HEALTH HAZARD DATA

 

PRIMARY ROUTES OF EXPOSURE : SKIN CONTACT : Yes INHALATION : No
EYE CONTACT : Yes SKIN ABSORBTION : No INGESTION : Yes
CARCINOGENICITY : OSHA : No IARC : No NTP : No ACGIH : No
MEDICAL CONDITIONS AGGRAVATED BY OVEREXPOSURE : None known to TGSC.
EFFECTS OF OVEREXPOSURE : May be irritating to skin and eyes.
EYE CONTACT EFFECTS : May be irritating to eyes.
SKIN CONTACT EFFECTS : May be irritating to skin.
INHALATION EFFECTS : May be irritating if inhaled.
INGESTION EFFECTS : May be harmful if swallowed.
NOTE : The above effects are based on evaluation of individual components and the relevancy to the mixture as a whole or to humans is unknown.
EMERGENCY AND FIRST AID PROCEDURES :
EYE CONTACT : Flush immediately with clean water for at least 15 minutes. Contact a physician immediately.
SKIN CONTACT : Remove any contaminated clothing or shoes. Wash affected areas thoughly with soap and water for at least 15 minutes. Contact a physician as necessary.
INHALATION : Remove from the exposure to fresh air. If breathing has stopped, administer artificial respiration and oxygen if available. Contact a physician as necessary.
INGESTION : Wash out mouth with water and give water to dilute provided person is conscious. Contact a physician or local poison control center immediately.

 

Section VI : REACTIVITY DATA

 

CHEMICALLY STABLE : Yes
CONDITIONS TO AVOID : This product presents no significant reactivity hazard. It is stable and will not react violently with water. Hazardous polymerization will not occur.
INCOMPATIBILITY WITH OTHER MATERIALS : Avoid contact or contamination with strong acids, alkalis, or oxidizing agents.
HAZARDOUS COMBUSTION OR DECOMPOSITION PRODUCTS : Carbon monoxide and unidentified organic compounds may be formed during combustion.

 

Section VII : SPILL OR LEAK PROCEDURES

 

SPILL, LEAK AND WASTE DISPOSAL PROCEDURES : Eliminate all ignition sources. Ventilate area. Contain spill and recover free product. Absorb remainder on vermiculite or other suitable absorbent material. Use of self-contained breathing apparatus is recommended for any major chemical spills. Report spills to appropriate authorities if required.
WASTE DISPOSAL METHODS : Place material and absorbent into sealed containers and dispose of in accordance with current applicable laws and regulation.
NOTE : Empty containers can have residues, gases and mists and are subject to proper waste disposal.

 

Section VIII : SPECIAL PROTECTION INFORMATION

 

RESPIRATORY PROTECTION : None generally required. Use NIOSH approved respirator in confined area or if material is rated toxic.
VENTILATION PROTECTION : Local exhaust meeting ACGIH criteria as needed.
PROTECTIVE CLOTHING : Chemical resistant clothing is recommended.
PROTECTIVE GLOVES : Use chemical resistant gloves is recommended.
EYE PROTECTION : Use goggles or face shield is recommended.
OTHER PROTECTIVE EQUIPMENT : Avoid inhalation and contact with skin and eyes. Good personal hygiene practices should be used. Wash after any contact, before breaks and meals, and at the end of the work period. Contaminated clothing and shoes should be cleaned before re-use.

 

Section IX : SPECIAL PRECAUTIONS

 

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE : Place material and absorbent into sealed containers and dispose of in accordance with current applicable laws and regulation.
OTHER PRECAUTIONS : Good manufacturing practices dictate that an eyewash fountain and/or safety shower should be available in the work area.

 

Section X : EMERGENCY PLANNING & COMMUNITY RIGHT-TO-KNOW (SARA III)

 

311 / 312 CATEGORIZATION (40CFR 370)
FIRE : Yes SUDDEN RELEASE OF PRESSURE : No REACTIVITY : No
IMMEDIATE (ACUTE) : No DELAYED (CHRONIC) : No
312 INFORMATION (40CFR 372)
This proprietary mixture contains the following toxic chemical(s) above de minimin concentrations subject to the requirements of Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986:
See Section II.

 

Section XI : PREPARATION DATE OF MSDS

 

PREPARED BY : TGSC Occupational Health and Safety Department. Date : 02/19/96

 

DISCLAIMER

 

The information contained on the Material Data Sheet has been compiled from data considered accurate. This data is believed to be reliable, however, it must be pointed out that values for certain properties are known to vary from source to source. The Good Scents Company USA Expressly disclaims any warranty expressed or implied as well as any liability for any injury or loss arising from the use of this information or the materials described. This data is not to be construed as absolutely complete since additional data may be desirable when particular conditions or circumstances exist. It is the responsibility of the user to determine the best precautions necessary for the safe handling and use of this product for his application. This data relates only to the specific material designated and not to be used in combination with any other material. Many federal and state regulations pertain directly or indirectly to the product's end use and disposal of containers and unused material. It is the purchaser's responsiblity to familiarize themselves with all applicable regulations.